|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Throttle Adaptation Procedure - M54 MS43 EDK
SUBJECT: M54 EDK Throttle Adaptation Procedure MODEL: All with M54/MS43 SITUATION: The EDK (electronic throttle control) adaptation must be reset after a new engine control module, or a new EDK unit is installed. PROCEDURE: The adaptation process takes approximately 20 seconds to perform. If the adaptation process is not performed, the vehicle will not start, or run in "fail-safe" mode. If the vehicle does not start, or runs in "fail-safe" mode after replacing the DME or EDK, perform the following procedure: 1. Turn ignition ON (KL15) for 10 seconds. DO NOT ATTEMPT TO CRANK / START THE ENGINE. 2. Turn the ignition OFF for 10 seconds. 3. Start the engine. References: http://home.comcast.net/~jns-johnson/M54-MS43_EDK_Throttle_Adaptation_Procedure.pdf |
Sponsored Links | |
|
Bookmarks |
|
|
|