Quote:
Originally Posted by lordshin808
make sure you change all the settings to COM1.
so that all the settings match COM1 in all the ini files.
|
that and the path i think might be wrong
my path shows by default..
%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\Sy stem32\Wbem;C:\EDIABAS\Bin
that doesn't seem right
my obdi.ini shows for the top portion
[OBD]
Port=Com1
Hardware=STD:OBD
then has UNIT A-D with COM Ports1-4
ediabas.ini has
Interface = STD:OBD
don't remember which other ini i might be missing that needed changing
*EDIT*
didn't realize there was 2 USB drivers for this
a serial port which i knew of already and have set correctly
then a USB Serial Converter so i just went and selected that and manually installed drivers from disc for it
still not sure about my path setting, i know you add ;C:\EDIABAS\Bin to the end which was already there by default
and when i set the one usb driver to com1 it no longer gives me the tab that show to ..
b. Ensure “use fifo buffers” option is marked and receive buffers and transmit buffers are
both set to 8. Once that is finished press ok and exit all windows.
i only see the tab that shows the latency
if my device is not assigned to COM1 then i have the received and transmit buffer options but then no latency?
*EDIT*
last attempt of the night
same error so i thought i'd try FRM option after the F3 part and get a new best version error
not sure what to do now
before i was atleast getting both battery and ignition solid, now i can't even get that??