make sure you change all the settings to COM1.
so that all the settings match COM1 in all the ini files.
Quote:
Originally Posted by Mr.X5_3.0si
ya i did
*EDIT*
this HOWTO says to set it to comport 4 then go into the OBD.ini file in c:\windows and change the comport to comport4
any truth to that?
install is complete, wondering if i should run SP-Daten file update via BMW Coding Tool as the guides next steps are to plug into the comp then BMW, then run INPA
*EDIT*
after all that when connecting to INPA battery on, inginition status off
tried to run NCSExpert and hit F3 where i was at previously, new error
COAPI-2020: no answer from ECU
IFH-0009: ECU not connected or doesn't answer
dont know if im going to win this battle
i did figure out how to get it on COM1 correctly and changed it over
i will breathe for a bit and try after dinner
|
03-26-2013, 10:44 PM
Threaded Mode
