01-09-2006, 11:05 AM
|
|
Administrator
|
|
Join Date: Mar 2005
Location: X5world
Posts: 54
|
|
|
Rear Bumper Removal from a BMW X5
Contributed by: X5world
Removing Rear Bumper
You need to remove (2) T55 Torx
head sockets you'll see located just above exhaust tips.
Then remove (2 ea.) 8mm screws in well behind each rear wheel.
With a person on each side, the bumper slides right off.
Install in reverse. You'll see a bracket on each side, just be sure to line up
the slots.
T55 Torx is not easy to find. Check with Snap-on, Matco, Mac Tools or NAPA.
|
Hybrid Mode
