FCAB or Rotor?

[ard]

Originally Posted by BatKing

I immediately notice the steeling wheels shakes when applying brake @60+mhp.

The dealer service guy did mention the Control Arm Bushing was starting to fail.


But it look fine to me with the rubber look exactly like in the product picture with out splitting or cracking. Obviously I am not a pro , and my visual inspection means nothing.nks

Classic sign of thrust arm bushing failure. Classic. AKA 'lower control arm'

It is VERY hard- actually impossible- to diagnose by visual inspection

You going to replace the whole lower control arm or just the bushing?

LCAs should be a one hour job. 2 hours to replace the bushings. But you should do an alignment afterwards.