|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
03-09-2009, 05:47 PM
|
||||
|
||||
|
2003 X5 4.6, wheel question
what do you guys think. should i pass or go for it... opionions appreciated. thanks guys and gals 
|
| Sponsored Links | |
|
|
|
|
#3
03-11-2009, 06:59 PM
|
||||
|
||||
|
I believe member: bigfish is running 10.5 all-around on his Dinan S3 4.6is.
|
|
#4
03-11-2009, 08:55 PM
|
||||
|
||||
|
You can run 10.5 all around. I have 215's 20x10.5 with 295/40/20 on the way...
__________________
 2005 545i Sports/Prem Package (Retired) 2003 X5 4.4i-sport package, cold weather package, OEM trailer hitch, 20' replica metallic pewter 215's, X-pipe, Navi w/ custom splash (MUFC logo), cross drilled brembo rotors with Akebono ceremic pads.
|
|
#5
03-12-2009, 03:47 AM
|
||||
|
||||
|
I found this post while searching. thanks though guys.
1.20" front Oem std Offset is in fact ET45.The 10.5" wheels should be ok at the front providing you stick with 275/40 tyres.They will only stick out 10mm!Quite acceptable. 2.Dont go for 315 allround as on the front theses will stick out 30mm and also be 10mm further in! 3.So you have a 10mm (not 5mm)difference in relation to the rear.May be ok without a spacer!Try it and see!Its your preference.You can always buy a 10mm spacer later for the rear. 4.If you decide to go for the 10mm spacer ,then the flares all round would look good. In my professional opinion,you will be ok with thye 10.5" and oem spec tyres .
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
|
|
Linear Mode
