|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Alternator Harness
How to unplug control harness to my X3 2004 alternator? Seems stuck.
Had problem also with the fan plug and finally forced off but needed tie wrap to hold on reinstall. Don't like these Bosch electrical connectors. Help |
|
#2
|
|||
|
|||
|
bogrady.....ALL connectors have a positive locking snap. You must "release" the latch before the connector will release. Some are very difficult and may require a small blade screw drive or other pick to get the latch over the hook AT the same time trying to pull the connector off. I too have problems with them, as you can never seem to find the release lever and when you do, it is very hard to squeeze. Need a 3rd hand sometimes.
__________________
Current garage '07 X3 3.0si 133k '05 330Cic 44k ZHP '01 540i 40k 6 speed M sport '92 535i 49k 5 speed '04 Chevy Trailblazer EXT 97k '96 Chevy Z71 62k |
|
#3
|
|||
|
|||
|
Oops I may have lost one of the two pins in plug to alternator getting it off.
Does field circuit need both pins ? Where can I get new plug. harness? On old cars I never had so much trouble replacing anything but there was not so many cheap plastic parts , sensors and computeres. Engine performance is great however and it avoids old time carburetor and timing adjustments I was surprised to see no dist coil but rater a separate coil on each plug. Seldom see black or blue smoke from cars anymore |
|
#4
|
|||
|
|||
|
BMW has had coil over plug since the early 90's hahah
__________________
-e24 m6 -e32 740/5 -e34 525it -e83 -e83 Msport (gf) -e30 325ix (gf) |
![]() |
| Bookmarks |
|
|
|
|