PDC retrofit

[n_sievers]

I did the retrofit on my 2001. The hardest part was cutting the holes in the bumpers. I got all components (8 sensors, console switch assembly, PDC module, rear sounder and rear bumper wiring harness) with exception of the sensor trims and mounts off ebay and ordered the trims and mounts from tischer. Due to the option level on mine it was prewired. Just had to release and route the front sensor wires, install the console switch assembly, release rear sounder wire and install sounder, plug in and install the module, plug in and route the rear sensor harness. Facelift models have different front corner sensors so make sure to note that when sourcing parts.