|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#3
04-12-2015, 08:03 AM
|
|||
|
|||
|
If you leave it sit, do all the corners hold position and they are just off from one another? I suspect someone has done some work along the way and not properly recalibrated it. You need someone with GT1 or INPA software to reset the corners. You can use the software to raise and lower each corner in small increments, validate the measurements and reset the home position. A good independent shop with CarSoft should be able to do the same.
__________________
Daily Drivers: - 2008 535i, 320,000km - 2004 X5 4.4, 01/2004 production, 420,000km - 1997 328i, 350,000km Track: - 1996 328i, track/race car, ~300,000km Winter: - 2013 Ski-Doo MXZ X 800 E-TEC, trail can - 2007 Ski-Doo MXZ Blizzard 800 HO - 2001 Ski-Doo MXZ 600 w/800 engine, exhaust - 1978 Ski-Doo Olympique 340 (vintage race sled) - 1977 Ski-Doo Olympique 340E 
|
| Bookmarks |
|
|
|
|
Threaded Mode
