|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
||||
|
||||
After Market Headlights E53
Sent from my iPhone using Tapatalk |
Sponsored Links | |
|
#2
|
||||
|
||||
don't replace 'em fix 'em. Take them off, remove all electrical components and fill them with water; rotate them around and find where water comes out. The factory shells have vent holes but have a rubber 90° boot that goes over the hole to restrict water from entering. It may be as simple as adding a similar boot to any vent holes (or a simple length of rubber hose). If they are assembled from two pieces that are screwed together, disassemble put in a bead of clear silicone and reassemble. (and also work on the venting issue mentioned above).
|
#3
|
||||
|
||||
Thanks I will try today!
Sent from my iPhone using Tapatalk |
#4
|
||||
|
||||
You can find photos online of factory lenses and the rubber boot(s) that cover all the holes. I think once you fill with water it will be painfully obvious where the water is leaking in and quite solvable. If it's a really tight seam or in a corner you may be best off with 2-part epoxy clear coat
Sent from my awrPhone using Tapatalk
__________________
2011 E70 • N55 (me) 2012 E70 • N63 (wife) |
#5
|
|||
|
|||
[QUOTE=ljnlaw;1044332]Has anyone purchased any good aftermarket xenon headlight assemblies that don't look like a rain forest after power washing? I constantly tell my detailer's employees not to power wash the headlight assemblies and every once in a while I get my truck back like this...I have purchased 2 different sets of aftermarket assemblies and it seems like they are all not well sealed.
Of the two aftermarket headlight sets that you purchased can you share with the community what were the brands of those aftermarket headlamps? Thanks |
#6
|
||||
|
||||
Those are Sonar headlights. They are not the ones me and mam4.6 have.
FWIW, I had a problem with my one headlight fogging up after my retrofit was completed but it was due to the turn signal socket not being fully seated against the housing. Twisted it a quarter turn and it sealed completely and any misting was gone and did not return.
__________________
2018 Ram 2500 6.7L Cummins 68RFE 19k miles -Bright White/Black - Big Horn Sport - Crew Cab Short Bed 2013 X5 35D (CEO's) - Born on 5/17/2013 - 82k miles - Alpine White/Cinnamon Brown/Premium Pkg, Sport Activity/Premium Pkg and Sound/20" Style 214/Running Boards |
#7
|
|||
|
|||
Quote:
|
#8
|
||||
|
||||
Many use Depo lights as aftermarket replacements.
__________________
X5 4.6 2002 Black Sap, Black interior. 2013 X5M Melbourne Red, Bamboo interior Dallas |
#9
|
||||
|
||||
As long as you put some new/extra butyl in the channel when resealing you'll have no issues, and just make sure the vents are clear and attached when putting everything back together, there are 3 vents on the back housing.
__________________
2018 Ram 2500 6.7L Cummins 68RFE 19k miles -Bright White/Black - Big Horn Sport - Crew Cab Short Bed 2013 X5 35D (CEO's) - Born on 5/17/2013 - 82k miles - Alpine White/Cinnamon Brown/Premium Pkg, Sport Activity/Premium Pkg and Sound/20" Style 214/Running Boards |
#10
|
||||
|
||||
Headlights
I have to tell you I bought a set from Umnitza, they are gorgeous headlights but turned out to be a nightmare. Led's blinking on their own and bad customer service. I always say "anyone who buys a German automobile for the quality shouldn't screw it up with aftermarket parts!"
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|