|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
Side mirror puddle lights
Sent from my iPhone using Tapatalk |
| Sponsored Links | |
|
|
|
|
#2
|
|||
|
|||
|
Forgot the details e53 2001 is my ride
Sent from my iPhone using Tapatalk |
|
#3
|
||||
|
||||
|
I think BMW always has the wiring installed if part of a main harness (like seat heaters and rear interior floor lights). The wiring should be present somewhere in the mirror, or in the door.
My thinking is that they had mirrors with different wire harnesses. So you might have to get a mirror that has the puddle light wires and then it should plug right into the harness in the door.
__________________
2005 X5 4.4i Build 04/05 Maintenance/Build Log Nav, Pano, Sport (Purchased 06/14 w/ 109,000 miles) (Sold 8/15 w/121,000 miles) 2006 X5 4.8is Build 11/05 Maintenance/Build Log Nav, DSP, Pano, Running Boards, OEM Tow Hitch, Cold Weather Pckg (Purchased 08/15 w/ 90,500 miles) 2010 X5 35d Build 02/10 Nav, HiFi, 6 DVD, Sports Pckg, Cold Weather Pckg, HUD, CAS, Running Boards, Leather Dash, PDC, Pano (Purchased 03/17 w/ 136,120 miles) |
|
#4
|
|||
|
|||
|
I have done half it. I found the extra wires taped off in the mirror housing. The catch is the lights won't work immediately once installed - it requires coding to get it to work.
__________________
David.X5 2001 X5 4.4i Sport SOLD! at 160k miles |
|
#5
|
||||
|
||||
|
^There you go. Good infos David.
__________________
2005 X5 4.4i Build 04/05 Maintenance/Build Log Nav, Pano, Sport (Purchased 06/14 w/ 109,000 miles) (Sold 8/15 w/121,000 miles) 2006 X5 4.8is Build 11/05 Maintenance/Build Log Nav, DSP, Pano, Running Boards, OEM Tow Hitch, Cold Weather Pckg (Purchased 08/15 w/ 90,500 miles) 2010 X5 35d Build 02/10 Nav, HiFi, 6 DVD, Sports Pckg, Cold Weather Pckg, HUD, CAS, Running Boards, Leather Dash, PDC, Pano (Purchased 03/17 w/ 136,120 miles) |
|
#6
|
|||
|
|||
|
If you have replaced your side mirrors with ones that have the lights, then all wiring is present and if you have plugged in all wiring harnesses in the door then you should be fully connected but if you are adding the lights to the existing mirrors then you will have to get wires form the lights to the main mirror plug inside the door panel. Once connected then that is correct that you will have to activate through coding in your LCM.
|
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
|
|