Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > BMW SAV Forums > X5 (E53) Forum
Arnott
User Name
Password
Member List Premier Membership Today's Posts New Posts

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management


 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 07-01-2016, 10:14 PM
Member
 
Join Date: Jun 2012
Location: South Carolina
Posts: 568
williamx5 is on a distinguished road
UPDATE::::

Okay, here it is...

Well, before I got the fluid and parts, I decided to pull this huge plug in the pan... And I took some measurements... I'm thinking to myself, "WHY?"... Well, the top of the rim for the plug is about 9mm above the top of the gasket surface...





And the top of the threads for the fill hole are about 13.7mm from the gasket surface...



So, I figure it is for the initial fill cold... Then the fill plug is pulled when it's at temp to drain off the excess... Of course, I didn't try this when I put everything back together... UGH!!

Here's the 12 liters of fluid!! Liquid gold!!



Here is the seal I got...



All new stuff... I figured I was getting just the filter with the part number I pulled... I got the big plug, the little plug, and the filter... Good to know if you need a drain plug!!



Here are the part numbers...



Don't forget to line this up or you could end up starting the truck in drive...





In place...





This is all the way in... It is difficult due to it's location, but it will be good when the locking tab goes up...







This is the fill system I made... Just a 3/8 air fitting with a length of 3/8 fuel line... I put the fuel line OVER the exhaust as the bend was a bit too much...



This is initial fill... Running, but not up to temp...





This is getting up to temp... Not too happy with the fluid color... But!!



Ahhhhhh... I used the four new 40 Torx bolts to start the pan... They are easy to over tighten, so be careful!!

That's it... For now... Now on to why my trans if getting the fail safe...

Cheers for now!!
__________________
2001 E53 X5 4.4i (03-07-2001 build date) White exterior / hellbeige interior (6MT swap vehicle - Manny)
2002 E53 X5 4.6is (12-20-2001 build date) Imola Red exterior / M-texture interior (Red)
2003 E53 X5 4.4i (06-26-2003 build date) Silver exterior / Black interior (Silvester II)
2008 Mini Cooper S ragtop (04-17-2008 build date) Dark Silver exterior / Gray interior ( Topless)
BMWCCA member (#4745)

Last edited by williamx5; 07-03-2016 at 08:42 PM. Reason: Adding the good stuff!!
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On





All times are GMT -4. The time now is 10:27 AM.
vBulletin, Copyright 2026, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.