|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#11
|
|||
|
|||
|
Good day all!!
I finally got a day off to look into the control module that connects to the valve body in our transmissions... I was interested to find out there is actually a computer chip in that black housing by Bosch... ***Additionally interesting to find out that the one in my 04 X5 has a 03-09-15 date on it (Found out this is YY-MM-DD not the American MM-DD-YY)... I googled the part number on the computer box (1267017164) and there is a company in Bulgaria that fixes them... I didn't see a cost involved with this repair... I can imagine it would be more than the replacement trans I'm considering... This is the deal with these! They are not meant to be pulled apart... ZF or Bosch did a good job making it very difficult to disassemble... First things first... This seal did come off of the filter and stayed in the trans... Keep this in mind! ![]() The new one was very difficult to get out... I pulled it just enough to get the valve body out... ![]() Interesting!!! ![]() Computer part number you can look up... There is also a video you can watch if you google the part number... ![]() ![]() I would have been able to get the circuit run completely free from the plastic holder if it wasn't for this speed sensor of some sort... ![]() This goes under the computer chip housing... ![]() And the reason it was so difficult to get apart... There were two of these for each solenoid... This side was a bit easier than the other... In most cases there is a tab that moves and unlocks the connection... Not so here... You have to move the housing away from the tab... I don't recommend yous pull this apart... Nothing in there to solder back together or replace to fix the issues this thing causes... Unfortunately, as of this moment, I do not know how to get a replacement part without sending out the original to "be repaired" by someone... ![]() I cleaned this really well and I'm gonna see what happens when I reinstall it... If I get the same trans range sensor error, I'm going to get another valve body if it has this included.... Cheers for now all!!!
__________________
2001 E53 X5 4.4i (03-07-2001 build date) White exterior / hellbeige interior (6MT swap vehicle - Manny) 2002 E53 X5 4.6is (12-20-2001 build date) Imola Red exterior / M-texture interior (Red) 2003 E53 X5 4.4i (06-26-2003 build date) Silver exterior / Black interior (Silvester II) 2008 Mini Cooper S ragtop (04-17-2008 build date) Dark Silver exterior / Gray interior ( Topless) BMWCCA member (#4745) Last edited by williamx5; 07-15-2016 at 11:00 AM. Reason: missed a picture... and learned something! |
| Bookmarks |
|
|
|
|