need help wires came off worn socket.

[1iwilly]

hello to all
while changing one my abs sensor the wires came out of the plug which is worn
and broke while pulling on it from age any way i bought 2 new ones from ecs tuning but know i need help to put the 2 wires back in the right place
1 wire is red 2nd wire is blue with red stripe see pics
thanks

[David.X5]

Hope you're a gator at least!

I'll look up the wiring for you. Which wheel position?

Can you see little number 1 and 2 on the new housing if I tell you the matching colors?

[upallnight]

If it is the front left sensor see this link:

http://www.xoutpost.com/923956-post4.html

[1iwilly]

Thanks I don't have the connector yet waiting for it to arrive sometime this week but you guys are saying there should be number 1 and 2 on the housing.???

[upallnight]

Originally Posted by 1iwilly

Thanks I don't have the connector yet waiting for it to arrive sometime this week but you guys are saying there should be number 1 and 2 on the housing.???

Yep

[1iwilly]

thanks part be here tomorrow hope and pray it is label

Originally Posted by upallnight

Yep

[1iwilly]

ok got connectors today looking at pic from the bottom part hump facing up hole on the left is #2 hole on right is #1
hope this makes it more easier for future reference.so this thread could be close thanks for the replies.

[David.X5]

For those of you following along. Wiring diagram ELE-203 in the Bentley manual. Front Left wheel speed sensor has two wires. Position 1 is RT (Red). Position 2 is BL/RT (Blue/Red stripe). Wire gauge is 0.5 mm2, or a hair smaller than 20 gauge.