need help reading this screen shot of inpa.

[gatojurko]

Make your trajectory straight! Even when u change the size of wheels it has to be done straight but not every body is doing this!

[1iwilly]

Abs module was just refurbish 3 weeks ago I just replace the LF abs sensor that was bad the 3 other check out ok
So that leave SAS

[Helihover]

Originally Posted by gatojurko

Make your trajectory straight! Even when u change the size of wheels it has to be done straight but not every body is doing this!

Ya when you calibrate.......

The steering sensor can not through an abs fault.

[Helihover]

Originally Posted by 1iwilly

Abs module was just refurbish 3 weeks ago I just replace the LF abs sensor that was bad the 3 other check out ok
So that leave SAS

Abs pump? Valves? Ect.

[1iwilly]

here is the 2 codes for dcs=
ECU: DEGS
Job status: --- - API job FsLesen: job status error - API job FsLesen: job status error
================================================== ===========
Variant: DSC57 2 Error in error memory Error registration 1: 0x0068: error steering angle Steuergeraet <<<< !!!
Error accurances: 255 vehicle speed 2.75 km / h ASC not passively switched ABS control passive BLS not operated ASC control passive ACB passive HBA passive ECD passive HDC passive
-------------------------------------------------- ---------------------------------- Error registration 2: 0x005A: time-limited passive circuit <<<< !!!
Error accurances: 255 vehicle speed 2.75 km / h ASC not passively switched ABS control passive BLS not operated ASC control passive ACB passive HBA passive ECD passive HDC passive

[1iwilly]

i was told today by a bmw tech that before any more parts change to make sure the front end is align properly not every alignment shop know about bmw x 5 and the proper way to align them been mine was done in sept last year by tire kingdom in fl i complain about steering wheel not been 100% on 12 o clock they said their machine is new and the specs for my truck are correct to bmw specs.back to the drawing board

[jopecasa]

First ....get those EM (Error Memory aka Shadow codes) and IM cleared via INPA.

Scan then report back please.

[1iwilly]

Variant: LWS5_1B 1 Error in error memory Error registration 1: 0x000B: LWS ID wrong <<<< !!! Error accurances: 20
**** static error Error code: 0B 34 B3
I can't find info on how to fix that error or how to code the SAS.??

Originally Posted by jopecasa

First ....get those EM (Error Memory aka Shadow codes) and IM cleared via INPA.

Scan then report back please.

[1iwilly]

ok i found the info and hope it will help others down the road i just order the adapter today here is the write up=
How to calibrate steering angle sensor with BMW V1.4.0 scanner | WOBD2.com Official Blog

so if i understand this right my vin=LP46406 so i would enter it as=604046706c.???

[jopecasa]

Once you've got PA Soft loaded on pc.

Back-up and save existing LEW Bin file.

Copy - rename - edit then upload.

You might need HEX editor to confirm and compare changes between bin files before uploading.