|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Arnott air suspension problem
Good Morning.
I have a problem After changing the pneumatic front balonas arnott makes noise when turning friction of rubber, it has been dismantled and mounted a few times and still the same. Any of you happened to you? E53 2004 Thank you |
|
#2
|
||||
|
||||
|
Don't u see the 'track' from that sound??
|
|
#3
|
||||
|
||||
|
Quote:
BMW X5 4.8iS 2005
__________________
BMW X5 E53, 4.8iS - 2005 Professional Stereo/Nav with DSP (modified BM54 module) - Converted to Eonon GA5166X with Reverse cam 4-Corner Air Suspension - Converted to BC Coilovers |
|
#4
|
|||
|
|||
|
It does so in the union to the chassis, up
|
|
#5
|
||||
|
||||
|
I don't quite understand, do you mean noise from the bag itself when it inflates /deflates Or when turning the steering wheel?
BMW X5 4.8iS 2005
__________________
BMW X5 E53, 4.8iS - 2005 Professional Stereo/Nav with DSP (modified BM54 module) - Converted to Eonon GA5166X with Reverse cam 4-Corner Air Suspension - Converted to BC Coilovers |
|
#6
|
|||
|
|||
|
when the steering wheel is turned, not the globe is the union chassis
|
|
#7
|
||||
|
||||
|
It seems your tires are rubbing the inside wall. Did you reset the compressor after changing the air bag? It is possible that the car is not rising and the 20" wheels will definitely rub against the wall and the airbag itself. I wouldn't drive the car before checking this. If you continue driving you'll risk puncturing the airbag. If the compressor works then make sure no air is escaping from the airline that is attached to the top of the airbag, and finally check both front leveling sensors...one/both could be out of place or broken off. Good luck.
BMW X5 4.8iS 2005
__________________
BMW X5 E53, 4.8iS - 2005 Professional Stereo/Nav with DSP (modified BM54 module) - Converted to Eonon GA5166X with Reverse cam 4-Corner Air Suspension - Converted to BC Coilovers |
|
#8
|
|||
|
|||
|
Quote:
|
|
#9
|
|||
|
|||
|
I would bet a dollar you have a dry ball joint, tie rod end etc. If you have a way, have someone turning the wheel rule you reach around the back and put your hand on each joint as it's moved. I'll bet you find it
Sent from my Nexus 6P using Tapatalk
__________________
04 E53 4.8 98 E38 4.4 04 Touareg 4.2 (x2) 87 E30 (getting a 4.4/6spd swap) 89 E30, selling it 96 E36 parts car MK2 jetta with a 1.9alh swap 90 XJ Crawler 2000 XJ crawler in the works 63 Ragtop bug 64 Bug 06 F-350 to drag all the above when they brake. |
|
#10
|
|||
|
|||
|
The noise makes the two dampers is detected in the glue that bonds the damper to the chassis, the mechanic tells me he has to settle and disappear within a month, but this does not convince me.
|
![]() |
| Bookmarks |
|
|
|
|