|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
04-05-2016, 03:54 PM
|
|||
|
|||
|
Trans Codes 31 36 3B
2002 X5 4.4i with all options except 4 corner air ride
Using Icarsoft i910 II Trans is throwing Codes 31-Gear monitoring 36-Gear monitoring 4 3B-Stall Speed monitoring DME C9 DMTL Heating It's in limp mode. I checked the 2 front O2 sensors and they are reading good. For the rear, bank 1 is switching a lot slower than bank 2. Bank 1 voltage is .32V - .54, Bank 2 is the same voltage just quicker at doing it. I erased the C9 and it did not come back with the engine running for 30 minutes. Voltages stayed the same. I was going onto a off ramp and was kicking it down to pass another car but it didn't. Noticed a sluggish feeling and the Trans Failsafe Program popped on. Drove it to the house a mile away in limp mode. Numerous attempts to move the vehicle but stays in limp mode. Reverse works perfectly. Looking for suggestions what it might be. Last edited by PR1AWRet; 04-05-2016 at 05:06 PM. 
|
| Bookmarks |
|
|
|
|
Threaded Mode
