What size tool for turn signal bulb replacement?

[babyduke]

My front left turn signal bulb is bad and I need to replace it. Looks like I need to slide the head light unit to do it. What size fitting/tool do I need?

[X53Jay4.8is]

Originally Posted by babyduke

My front left turn signal bulb is bad and I need to replace it. Looks like I need to slide the head light unit to do it. What size fitting/tool do I need?

4 8mm bolts to pull out to slide the headlight canister. You will need the 8 mm socket, ratchet and various extensions to access the bolts. Word to the wise have a magnet handy to catch the bolts on the bottom side so that you don't loose them upon removing them.

[upallnight]

Here's a video on removing the headlight. You will need to swing the headlight out from the center before taking it out since the lower trim is still attached to the fender.

https://www.youtube.com/watch?v=Ah5oCH0yFRg