|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Mind sharing how the camera looks in your heaunit mounted that low to the car?
I'm brainstorming and cannot get myself to run the wire through the hatch either, it's very tight and my cable pulling tool can't fit or if I force it too much afraid of chaffing some wires during the process. I was thinking of mounting it the license plate frame something like this: https://www.amazon.com/AUTO-VOX-Wate...se+plate+frame And have just the wire go through the lower hatch latch. Once the upper hatch is closed the wire won't be visible but when opened it will be but might have to live with it. Or even drill a tiny hole behind the license plate as it won't be visible. At least it will be easily serviceable in case the cheap camera dies or whatever. Easily serviceable is always my main priority.
__________________
2005 Imola 4.8iS |
|
#2
|
||||
|
||||
|
Quote:
I chose this mount for expediency of installation and ability to keep the wires out of sight. Any of the license plate cameras that I looked at required a wire stream along the lower center below the plate and on the face of the tailgate. So, my choice was a compromise for my personal limitations/criteria. Mike
__________________
Mike Dallas, TX & Appleton, WI 2003 E53 4.4i Pearl Beige 2003 E46 330Xi Monaco Blue 2007 E90 335Xi Black Sapphire Metallic 2011 F25 X3 28i Black Sapphire Metallic |
![]() |
| Bookmarks |
|
|
|
|