Trans failsafe prog, can torque interface?

[Canadian-boy]

Alright, so I was getting lean codes, I was getting rich codes ( unfortunately not getting rich$ )
I figured out it was throttle body boot had huge hole, I change boot, wipe throttle body and icv valve, put back together and then get the dreaded
"trans failsafe prog " ? I've checked all connections, all vacuum leads lines?
Only thing I did, was I pushed manually with my finger on throttle body flap? I doubt that could have caused this trans failsafe? I did have a code 92 "
can torque interface"
Don't know what to do? Besides that, it starts perfect, idles fines drives great except for a bit harsh shifting now that it's in this mode. Arrrrrrrrggg.
Disconnected Maf, runs horrible and rough idle, So it's NOt Maf. Is there a connector I missed or unhooked? I checked all plugs in transmission and cleaned them with electrical cleaner cause I drove through a lot of water a week ago, and thought....well, maybe....but this happened 3 days after the water and ONLY after I changed the boot?
Anyone have some input, I hate it when my baby says something's wrong and I can't help her 😫

Thanks for any input