|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Vanos replaced knocking noise afterwards ...need help please.
Engine was idling fine with a little of hesitation not alot got code p0012 ....so I swap maf sensors a little better Code says intake solenoid so swaped boths solenoids and got the exhust now..! so that means that the solenoid is the culprit. So off I go to get a new one ..and replaced it ...turn on the engine and hear this clack clack clack noise from engine like out of time ....my question is did I install them incorrectly . is there a way to install them. ....is there certain angle orientation or is not all the way in ....thanks in advance. .....2004 e53 4.4is sport. |
Sponsored Links | |
|
#2
|
||||
|
||||
Did you buy the right sensor? Some sensors can not be swapped from one side to the other.
__________________
2006 Infiniti G35 2001 BMW 3.0I E53 X5 Build date 08/2000 SOLD Lotus Europa 1970 Destroyed by fire Lotus Europa 1970 S2 Renault Powered Lotus Type 52 1970 Twincam Webers Powered PORSCHE 911 Targa 1982 The Garage Queen Audi Avant donated to Kars for Kids BMW 525IT Sold Audi 4000CS Quattro Sold Jensen Healey Lotus Powered Sold Opel 1900 Sold Triumph Spitfire 1971 Sold Triumph Spitfire 1968 Sold Plymouth "Cuda" 340 Six pack SOLD |
#3
|
|||
|
|||
Both from the same bank 1 I put the intake one to the exhaust and viceversa. ....both look exactly the same ...
Thanks... |
#4
|
||||
|
||||
I think the only way to screw up the install is to not push them in far enough. I remember when I did mine had to give some good pressure to get them to click in all the way. Kind of a weird angle too and can be tricky to do. That would be my first guess
__________________
2000 E53 4.4 2011 E70 35d |
Bookmarks |
|
|
|