X won't idel after replacing valve stem seals - receiving misfire codes.

		Xoutpost.com > BMW SAV Forums > X5 (E53) Forum
X won't idel after replacing valve stem seals - receiving misfire codes.

Xoutpost server transfer and maintenance is occurring....

Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management

LinkBack

Thread Tools

Display Modes

#11

06-08-2019, 03:34 PM

Purplefade Purplefade is offline

Member

Join Date: Apr 2009

Location: Ohio

Posts: 1,099

Adjustment units feel locked, lobs on 5 look good and I’ve broken the intake cam bolt and turned the cam to align it with the special tool. Locked the cam bolt back down and rotated the engine two full revolutions and rechecked the timing - all appears to be spot on now.

Plates sit nice and flat on the head and take no effort to apply or remove

Going to pull everything off the engine now and start reassembly, fingers crossed once she’s all buttoned up she runs this time!

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Contact Us - Xoutpost - Sponsors - Archive - Top

All times are GMT -4. The time now is 05:54 AM.

© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.