Only runs correct when no MAF is plugged in?!

[fishhouse4]

Originally Posted by andrewwynn

on the N62 it will run like total shit if the I.L. get out of whack; they can either be damaged (there was a recall period a shit ton of the levers or eccentric i forget which were made wrong), or the lift minimum is set wrong. it's supposed to set itself from a power off, but look into 'reset intermediate levers' there is a key-sequence to do the job w/o software.

And this would only show symptoms when the MAF is plugged in?

[andrewwynn]

Originally Posted by fishhouse4

And this would only show symptoms when the MAF is plugged in?

Correct, the owner would unplug either MAF or valvetronic to get the engine to run until it warmed up. In his case, the motor would run ok once warmed up.


Sent from my iPhone using Tapatalk Pro