|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
|
||||
|
||||
|
I have attached some more pics of INPA while moving, to see if it would help anyone diagnose this more specifically, and also a short video clip of the Live Data.
https://www.youtube.com/watch?v=y-VPu1zXR0M
__________________
2012 X5 30d |
|
#2
|
|||
|
|||
|
There's no signal from rear left sensor like suspected. Unfortunately this doesn't give us any more info. Diagnostics alone can't isolate if the sensor is dead, wiring from sensor to module broken or module internal wiring broken.
|
|
#3
|
|||
|
|||
|
Quote:
Is it possible to swap sensors / connectors left to right to see if the live data + error code moves with it?
__________________
2001 X5 3.0i, 203k miles, AT, owned since 2014 |
|
#4
|
||||
|
||||
|
Quote:
I will try to swap them over next weekend when im off work.
__________________
2012 X5 30d |
|
#5
|
||||
|
||||
|
Quote:
Rear sensor is the same. I would put right to left and old left info right (very good chance that part is not defective). I would use one of the old sensors to make a jumper thar can cross wire left wiring into right wheel & vice versa.
__________________
2011 E70 • N55 (me) 2012 E70 • N63 (wife) |
|
#6
|
||||
|
||||
|
One thing i forgot to mention is the MPG gauge on the cluster also stops working at the same time, however the tachometer, fuel gauge and temp gauge continue to work. Does this help anyone with the diagnosis?
__________________
2012 X5 30d |
|
#7
|
|||
|
|||
|
Same old. You need speed signal to calculate MPG.
|
![]() |
| Bookmarks |
|
|
|
|