Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > BMW SAV Forums > X5 (E53) Forum
Fluid Motor Union
User Name
Password
Member List Premier Membership Today's Posts New Posts

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management


 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 03-30-2020, 06:27 PM
Member
 
Join Date: Aug 2016
Location: SF Bay Area
Posts: 18
caposto is on a distinguished road
No luck with INPA on 2002 E53 3.0i

I made another attempt to get INPA / DIS working with no luck. I purchased the 'kit' in 2017 on eBay from the Romanian guy (catastefy) and it included:

INPA version is 5.0.6
DIS v57
OBD USB cable labeled Autolynks Edia 1 Baujahr1996-03/2007
Cable driver 2.08.28 (FTDI)
SSS, NcsExpert, WinKfp, Config KDCAN cable (none of which I've tried but are installed)

My machine is running Windows 7 Home Premium SP1

I originally had the Port setup wrong so I fixed that. I had the IP address problem in DIS but I fixed that. I had a DIS VMware issue with the clock speed so I fixed that. After it still didn't work, I upgraded the driver to 2.12.28 but still it won't read. It seems to acknowledge the connection to the OBD port but it can't read any information.

The errors I'm getting in INPA are:
These come in a popup labeled Variant checking
"IFH-0006: COMMAND NOT ACCEPTED. Program will be stopped!"
"IFH-0009: NO RESPONSE FROM CONTRLUNIT. Program will be stopped!"
"Request control unit: 'MS430DS0' not found. Control unit found: '???'. Program will be stopped!"

This came in a popup labeled EDIABAS-Error
"ApiCheckJobStatus: Error #19
IFH-0009: NO RESPONSE FROM CONTROL UNIT
API job error or no such result !
Continue script processing?"

In DIS I got errors 200.19 and 200.102 and basically anything I tried it said it can't find the control unit or diagnosis bus error or something similar.


I tried reloading INPA and DIS with the installer but no change. I tried all key ignition positions, even tried while the car was running, but no change. It just seems like the cable is not reading anything even though its plugged in, the Port is set correctly, and the light is on.

I did not solder or jump any connectors on the cable because its not clear which models that applies to and from what I can find its only for later model years plus the cable specifies for 1996-2007. I can check this but I should be able to read something even with the cable not jumped.

Any ideas would be much appreciated!
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On





All times are GMT -4. The time now is 11:30 PM.
vBulletin, Copyright 2026, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.