HELP! EGS line disturbed - No CAN Communication

[jopecasa]

@upallnight
Thanks! I've tried this ...nothing unusual...I've got NBT retrofit on my X5 though


Anyways this is were I'm at now.:

Disconnected the following in order and still no Canbus

1 Steering angle sensor
2. ABS module
3. DME
4. Mechatronic connector
5. Yaw Sensor
6. Valvetronic module
7. ..........Have I'missed out on any module?

Working Instrument cluster was temporary disconnected ...still no luck.

I don't know what's causing my no communication...there must be an open or short in the PT CAN

Next up.....Grounding Points...Anyone can help with their location?

My X5 is a mess now....plastic parts are everywhere......big mess.



I need to get ISTA working ...just to rule out INPA and BMW Scanner.....and K-Dcan cables.