Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > BMW SAV Forums > X5 (E53) Forum
Arnott
User Name
Password
Member List Premier Membership Today's Posts New Posts

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management


Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 10-26-2020, 10:23 PM
Member
 
Join Date: Jul 2013
Location: Philadelphia
Posts: 35
rody1285 is on a distinguished road
Self Leveling Suspension Module

I have been having a problem with my air suspension.

On occasion I would get the self level suspension inactivate error so I used my INPA software to clear it and the suspension would rise to a useable height. I was never able to successfully resolve the air ride issues. Over the past 3 years I have replaced all the air bags, and air compressor, but still got the codes.

Now I have a new problem, INPA does not find the module so I can't clear the codes or active the front to rise.

I get a message "No Response From Control Unit"

Is control module bad? Literally disappeared one day, I also checked on another scanner and it was gone.

I checked all the fuses (glove box and rear right panel) and also checked the high voltage fuses (near spare tire on back to the left )all were good.

I ordered another module 'used on ebay' and the module was still not found??? Luckily I was able to send it back, I guess its possible that both modules were bad but that doesn't seem likley.

Has anyone every lost a module? Is there an issue with the module getting power?
Attached Images
 
Reply With Quote

Sponsored Links

  #2  
Old 10-26-2020, 10:31 PM
EODguy's Avatar
Member
 
Join Date: Jun 2018
Location: Saudi Arabia/Philippines/USA
Posts: 4,534
EODguy is on a distinguished road
Trust me it is possible to "find" plenty of non-working modules.... I went through 5 not counting my original and ended up going coils.

Sent from my SM-A730F using Tapatalk
__________________
"When the Team Chief said.... You're trapped in a hole with nothing but a goat and a slinky, what do you do? Stubby said, I'm not sure but it won't end well for the goat...." ~(Overheard) Last day, Phase 3, Q Course
Reply With Quote
  #3  
Old 10-26-2020, 10:38 PM
Member
 
Join Date: Jul 2013
Location: Philadelphia
Posts: 35
rody1285 is on a distinguished road
I was thinking about that too, I have 181,000 miles and mainly use it tow boat and trailer. Maybe a severe snow day or something. This also has the ABS trifecta errors (abs, traction control etc)

coils for the front are about 279 and the used module on ebay was 250, I might just cut my losses and give up on the air ride, make the car useable. The rear is up I might just leave that.

Do you still have the fault codes since you switched to coils?
Reply With Quote
  #4  
Old 10-27-2020, 09:25 AM
Premier Member
 
Join Date: Jul 2011
Location: La Vista, NE
Posts: 327
ajacks8 is on a distinguished road
Quote:
Originally Posted by rody1285 View Post
I was thinking about that too, I have 181,000 miles and mainly use it tow boat and trailer. Maybe a severe snow day or something. This also has the ABS trifecta errors (abs, traction control etc)

coils for the front are about 279 and the used module on ebay was 250, I might just cut my losses and give up on the air ride, make the car useable. The rear is up I might just leave that.

Do you still have the fault codes since you switched to coils?

Fault code will certainly remain. As for expecting to leave rears alone...they will eventually draw down and leave you stuck until replaced with springs. I was stuck for over a month because Bilstein had a 3mo backorder that is finally replenishing. Just wanted to prepare you. Good LUCK! I went with H&R + Bilstein B6 if you care. Air ride is definitely gone...rides like a sport truck!
Reply With Quote
  #5  
Old 10-27-2020, 10:28 AM
crystalworks's Avatar
Member
 
Join Date: Jun 2014
Location: SA, TX
Posts: 6,479
crystalworks is on a distinguished road
Fault can be coded out. Actually the key is coding the truck so it thinks the air ride was never installed to begin with. Mine is now on bcr coilovers and is code free. Does require having BMW software package on a laptop though.

I'm going to work on a full diy for the coding when I get some time.
__________________
2005 X5 4.4i Build 04/05 Maintenance/Build Log
Nav, Pano, Sport (Purchased 06/14 w/ 109,000 miles) (Sold 8/15 w/121,000 miles)


2006 X5 4.8is Build 11/05 Maintenance/Build Log
Nav, DSP, Pano, Running Boards, OEM Tow Hitch, Cold Weather Pckg (Purchased 08/15 w/ 90,500 miles)

2010 X5 35d Build 02/10
Nav, HiFi, 6 DVD, Sports Pckg, Cold Weather Pckg, HUD, CAS, Running Boards, Leather Dash, PDC, Pano (Purchased 03/17 w/ 136,120 miles)
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On





All times are GMT -4. The time now is 06:38 PM.
vBulletin, Copyright 2026, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.