E53 Speaker Passive Crossover?

[crystalworks]

What is your VIN so we can see what the setup originally had? That will tell us how it is wired.

I forget the specifics but a buddy just went through this same thing and corrected it. I'll check with him and see what the deal was. His was HiFi and was either getting no signal or no highs to the tweets.

[trhaverstock]

VIN is 5UXFA135X4LB09009. Thanks!

On the other post, that is a good idea about jumpering to speaker directly but will probably show that something upstream is affecting sound quality.

[Mouse]

Originally Posted by crystalworks

What is your VIN so we can see what the setup originally had? That will tell us how it is wired.

I forget the specifics but a buddy just went through this same thing and corrected it. I'll check with him and see what the deal was. His was HiFi and was either getting no signal or no highs to the tweets.

Correct. I installed components and after installing, found that the signal is not full range going to the mid-drivers. I had to wire the tweeters off the factory wiring points in the door instead of the aftermarket crossover.