|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#8
|
|||
|
|||
|
I had a similar problem on my 2006. Only on one of the swing arms. Some dipshit at an alignment shop backed the eccentric off too far, allowed it to ride over the stamped protrusion and then tightened it which flattened the protrusion. I took it apart and got in there with a air hammer and pushed the protrusions back out so the eccentric would engage properly.
|
| Bookmarks |
|
|
|
|