Adaptive to Non-Adaptive Headlight Assembly

[JayDiesel]

Hello!

I just recently purchased an X and am in the process of updating it to my liking.

One of the things that I did immediately is purchase a set of euro headlights (with clear corners) off of ebay. When I made the order, I neglected to realize that I purchased a set of headlights with the non-adaptive bi-xenons. The car originally came from the factory with adaptive bi-xenons.

I swapped the headlights over and I am only having a problem with the xenon on the drivers side of the car, it works intermittently. The passenger side works all of the time. When I remove the assembly (from the drivers side) and plug it in to the passenger side, it works all of the time.

What are my options here? Do I need to get a new LCM to install for a non-adaptive kit? I still have the old headlight assemblies as well, is there any way to swap over the adaptive feature to the new headlights?

Any guidance would be appreciated. Thank you.

[JayDiesel]

RIP

[miloh]

Originally Posted by JayDiesel

I am only having a problem with the xenon on the drivers side of the car, it works intermittently. The passenger side works all of the time. When I remove the assembly (from the drivers side) and plug it in to the passenger side, it works all of the time.

Does the passenger side work intermittently on the driver side too? If that's the case then I would suspect wiring somewhere may be bad. Any errors?