|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
12-19-2021, 07:21 PM
|
||||
|
||||
|
Transmission Fluid Change Question
Retired XP = "20 yr old laptop". That's my point.
August 2001 is when XP was released. I also don't use Windows. Barf. I do IT for a living not a fan at all. Sooner or later I'll prop use my win7 emulator to run inpa etc but haven't needed for the first seven years so far so good.
__________________
2011 E70 • N55 (me) 2012 E70 • N63 (wife) Last edited by andrewwynn; 12-19-2021 at 07:37 PM. 
|
|
#2
12-20-2021, 01:14 PM
|
||||
|
||||
|
PA Soft 1.4
OP... (and everyone else)
If you don't have BMW scanner 1.4, I would suggest trying it out. It's pretty easy to use and relatively inexpensive for the "chinesium" ones. I ordered mine off Ali for I think around $10 (plus S&H) at the time. I made sure to get the FT232RQ chip (most likely fake...but better than the FT232RL). This can still be used with the official FTDI drivers and for me, works great. At any rate, the Ali listing says that this only works for WinXP--but it isn't true. The FTDI chip that converts the old serial data to USB data has in fact Win10 support. So then at that point, the SW can interpret this data and use it. The latest "official" version of PA Soft 1.4 is the 2009 version (if I remember correctly) as there is an "un"official version out there (I think 2011..?). https://www.aliexpress.com/item/4000...90759223%22%7D
__________________
2003 BMW X5 3.0i -- MT5, 3.64s final gears, H&R lowering springs, K-Mac bushing kit 2007 BMW X3 3.0Si -- MT6
|
|
| Bookmarks |
| Tags |
| transmission fluid change |
|
|
|
|
Hybrid Mode
