|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Just weird stuff happening
I have 2006 X5 3.0. 99k miles and has been very well cared for. Lately I've been having issues with fuel trim and bad 02 sensors. Changed them both and issue went away. A few weeks later, same problem. Removed catch can (long story about why that's needed) and cleaned it and replaced what appeared to be a faulty drain Valve. Problem solved. Drove it off and on for a few weeks (maybe 100+ miles or so in town) with premium gas. No issues. Today out of the blue it went into failsafe mode with 4x4 light on and 4x4 inop error as well as "yellow" brake light on. Scanned it and it threw aP0461. I cleared it and drove same distance, all issues came back. Scanned again and it threw P1500. All the time, no check engine light. When I went to check MAF (just in case), the whole bellows was loose and hanging off. I reconnected and tightened clamp, drained the catch can and reset ECU. Drove hard around block triple the distance and no issues, no codes. Could that have been my issue all along? And/or could a battery that may be headed south cause a lot of random issues?
Sent from my moto g power (2021) using Xoutpost.com mobile app
__________________
2006 BMW x5 e53, M54, steel grey, black leather, pano roof, cold weather package, avic-z150bh head unit with JL Audio amp and speakers. |
|
#2
|
|||
|
|||
|
What scanner are you using? I found BMW specific scanners to be preferable to generics for the most part.
A battery going bad can cause all kinds of errors. Others will have better opinions than I.
__________________
2001 x5 3.0 (sold with broken motor), 1990 e30 M3, 1991 318is, 2002 325i, 2008 335i Dinan stage 3 6 speed, |
|
#3
|
||||
|
||||
|
Quote:
P codes are generic and may equate to something totally different i.e. fuel pressure bank 1 but it's really "misfire" cylinder 1, they list the most common as the answer. I swear by the Foxwell NT-510 or NT-520 but the NT-530 doesn't like to work on our e53's and the best thing is that it can stay in the car no matter the weather unlike laptop based scanners. Sent from my SM-A730F using Tapatalk
__________________
"When the Team Chief said.... You're trapped in a hole with nothing but a goat and a slinky, what do you do? Stubby said, I'm not sure but it won't end well for the goat...." ~(Overheard) Last day, Phase 3, Q Course |
|
#4
|
|||
|
|||
|
Low battery volts will cause all kinds of headaches and false codes. If it's old, replace it. Charge it up now and then when not driven. A battery tender works great.
Bad MAF connections or air intake leaks will hurt short/long term fuel trims. The data readings will point to bad O2 sensors. P1174/P1175 indicate bad O2 sensors. P0174/P0175 are O2 readings point to vacuum leaks, bad plugs, MAF issues, and other items.
__________________
'06 X5 3.0i - bought @143,123 miles (12/26/20) |
![]() |
| Bookmarks |
|
|
|
|