|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Steering Angle Sensor Issues
One of them was error code “61 Steering angle adjustment necessary” which I believe came up in the DSC or ABS module, but never triggered a trifecta or Check Engine Light (CEL). I tried but could not reset the code. I turned the wheel lock to lock while watching BMW Scanner's live data, and I did not see any dead spots, but I have no idea if the numbers are good. (I did write them down if that is helpful to know.) After fiddling with it for a while I "performed an LEW adaptation" which finally made the code go away away. Then, on my next trip, I had the ABS light and the DSC light (the round one on the center of the dash) come on. It did not trip the check engine light. I was able to check codes with the Foxwell afterwards (no time to get BMW scanner out) and it appears that the Foxwell cannot see the DSC module. However, it did see "Error OE Steering Angle Implausible" on the LEW module. Is there a way to recalibrate or resynchronize the steering angle sensor with either the Foxwell or BMW Scanner/PA Soft? Thanks in advance...
__________________
2003 3.0 5MT Topasblau Purchased in 2016 and surprisingly still running |
Sponsored Links | |
|
#2
|
|||
|
|||
Note: AfterI reset the error 0E in the LEW module, it did NOT get rid of the ABS or the DSC lights on the dash. Forgot to mention that above.
__________________
2003 3.0 5MT Topasblau Purchased in 2016 and surprisingly still running |
#3
|
|||
|
|||
It sounds like you did something wrong when you recalibrated the steering angle, maybe re-check that carefully.
__________________
1988 325is (purchased new) sold 2004 X5 3.0 2005 X3 2.5 2008 X5 3.0 (new to me) |
#4
|
|||
|
|||
I didn't recalibrate the steering angle ever.
__________________
2003 3.0 5MT Topasblau Purchased in 2016 and surprisingly still running |
#5
|
||||
|
||||
So maybe try it?
Lock to lock two or three times usually does it...
__________________
Wayne 2005 BMW X5 3.0d (b 02/05) 2001 BMW F650GS Dakar (b 06/01) |
#6
|
|||
|
|||
Quote:
Like I mentioned above, I do not know how to recalibrate the steering angle sensor. I did turn the steering wheel lock to lock on the drive today. Should the dash lights instantly disappear or would that happen on the next drive cycle if I performed it correctly?
__________________
2003 3.0 5MT Topasblau Purchased in 2016 and surprisingly still running |
#7
|
||||
|
||||
Quote:
*edit* - looks like you can also do a center calibration with the Foxwell. https://youtu.be/LLgLQ0JRfCk
__________________
Wayne 2005 BMW X5 3.0d (b 02/05) 2001 BMW F650GS Dakar (b 06/01) Last edited by wpoll; 11-14-2022 at 09:17 PM. |
#8
|
|||
|
|||
I had trifecta lights on and had the steering wheel calibration done at a shop to clear it. I had just replaced the ABS module, but 3 lights didn't go off until recalibration was done. They also checked the alignment in the process.
I tried the lock to lock hack several times, but it didn't have any effect. I was going to pickup an INPA cable and download the SW but I've got too many irons in the fire at the moment. I thought you could do the calibration with a Foxwell. Perhaps its dependent on the version of scanner you have... https://www.youtube.com/watch?v=LLgLQ0JRfCk
__________________
2003 X5 Steel Grey 3.0i |
#9
|
|||
|
|||
Thanks guys, I am away from the car for a few days (traveling for work) but will check all these things when I get back.
__________________
2003 3.0 5MT Topasblau Purchased in 2016 and surprisingly still running |
#10
|
|||
|
|||
I am pretty positive INPA let me calibrate.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|