|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Well I finally figured out what was wrong and in case anyone is searching this in the future here is what the problem was...
I'm retarded. When crimping on new terminals inside the X10117 connector, I accidentally switched pins 35 and 36! Pin 36 being the k-bus signal wire!
__________________
2006 X5 3.0D |
|
#2
|
|||
|
|||
|
doh!
|
|
#3
|
|||
|
|||
|
What does LCM stand for?
__________________
Mark 2001 3.0 Original Owner, still going 2012 E70 xDrive 35i Pre-Owned -- sold because no one could figure out the transmission problem |
|
#4
|
|||
|
|||
|
__________________
E39 530dA -02 M-Sport Messing metallic E53 X5 3.0dA -06 Sport Stratus grey E70 X5 40d -12 M-Sport Space grey |
|
#5
|
||||
|
||||
|
So happy to have found this tread.
Can you tell me what type of crimp pins you used for the X10117 connector please. |
|
#6
|
||||
|
||||
|
Quote:
Anyway, it was listed as 4E0972144. If you search that on AliExpress you should find what you need. I also had to buy a crimping tool to do the job correctly. It's a very fiddly job to do down there in the footwell with very little wire to work with, and the terminals are tiny! Good luck!
__________________
2006 X5 3.0D |
|
#7
|
|||
|
|||
|
Good luck!
Sounds like a nightmare
|
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
|
|