Electrical Issues

[EODguy]

Originally Posted by Ketoe

I did a scan yesterday using my Foxwell and come up with nothing. So that means it's must be all in my mind or I didn't do it right. I downloaded the INPA program on my PC and will give that a shot once it stops raining. Will pull the GMIII module later and get the numbers off it and get another off eBay. Will also take a look at the blower final stage device and see if that got torched again.

1st. Is your foxwell a nt-510 or nt-520?

I ask because many of the other models are either not 100% compatible with the e53 or they're not bidirectional.

2nd. Did you run your scan as automatic or did you choose what modules to scan?

Choosing the wrong modules can sometimes be read only partially.

Also just as a side note the central lock/flasher can have corrosion damage from spills or from a drink causing the plastic to sweat even without a spill.

Don't ask how I know....