Hellish misfire

[Aidzer0]

Originally Posted by EODguy

Fiber-optic cam could check valves.

Sent from Embassy network using Tapatalk

Any Endoscope will do? - there are tons on amazon and the like. I am not sure how to get it to turn 180 degrees to see the valves. I have never needed to use one.



Or would it need to be something like this: https://www.amazon.ca/Articulating-B...%2C114&sr=8-16



Thanks!

[X5chemist]

Most cameras come with adapters. Adapters will allow use for side, downward, or upward views. Both of my cameras have adapters.

[Aidzer0]

Originally Posted by X5chemist

Most cameras come with adapters. Adapters will allow use for side, downward, or upward views. Both of my cameras have adapters.

Gotcha, thanks! I will order one in the mean time.

[EODguy]

Some of them have a turn adjustable end also...

Sent from Embassy network using Tapatalk

[Aidzer0]

Hey Folks, quick update. I took the valve cover off and I cannot see anything wrong with the intake/exhaust valves or the cam shafts or the valvetronic shaft.. I have attached a ton of photos of the Cyl7 valves rockers.



I am still waiting for the borescope, no news on that front, it should be arriving on the 3rd of Jan.



I did manually crank the engine over and throughout the whole firing cycle, there was a hissing sound (kind of sounds from the exhaust.) I do not think this is normal since Bank1 did not have the same sound.

[EODguy]

Is it just the lighting or do you have a groove in your roller?

Sent from Embassy network using Tapatalk

[Aidzer0]

Originally Posted by EODguy

Is it just the lighting or do you have a groove in your roller?

Sent from Embassy network using Tapatalk

There is a slight grove, but my nail was not catching on it. It’s fully smooth.

[EODguy]

Originally Posted by Aidzer0

There is a slight grove, but my nail was not catching on it. It’s fully smooth.

Thanks I just wanted to check.

Sent from Embassy network using Tapatalk

[Aidzer0]

Originally Posted by EODguy

Thanks I just wanted to check.

Sent from Embassy network using Tapatalk

Oh for sure! Best to check, I could miss something. Thank you!

[ahlem]

Do you have the adapter for your compression tester that allows you to put some compressed air to it? At TDC with compressed air, you should hear something somewhere.