|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#14
08-19-2024, 10:10 PM
|
||||
|
||||
|
Cut the mounting tabs off the replacement 6.5" drivers and they will drop right into the factory speaker door pods. To remove the factory 2ohm speakers you can use an exacto knife to cut the silicon adhesive that goes around the perimeter. I used 3M VHT to temporarily adhere my new drivers and then ran a bead of silicon around the perimeter as factory. Looks almost OEM. Like below:
As others have mentioned, business audio (NA model) has an amp in the left hatch cubby. And 4ohm speakers will work fine in place of the 2ohm, but will be "underdriven." My wiring diagrams will do you no good as they are for DSP equipped X5's, but I could probably pull the business audio ones from TIS if you need them.
__________________
2005 X5 4.4i Build 04/05 Maintenance/Build Log Nav, Pano, Sport (Purchased 06/14 w/ 109,000 miles) (Sold 8/15 w/121,000 miles) 2006 X5 4.8is Build 11/05 Maintenance/Build Log Nav, DSP, Pano, Running Boards, OEM Tow Hitch, Cold Weather Pckg (Purchased 08/15 w/ 90,500 miles) 2010 X5 35d Build 02/10 Nav, HiFi, 6 DVD, Sports Pckg, Cold Weather Pckg, HUD, CAS, Running Boards, Leather Dash, PDC, Pano (Purchased 03/17 w/ 136,120 miles) Last edited by crystalworks; 08-19-2024 at 11:59 PM. 
|
| Bookmarks |
|
|
|
|
Threaded Mode
