Climate control buttons. Analog retrofit?

[EODguy]

Originally Posted by X5chemist

What are your vent temps?





Ha, the same thing happened to my heat button. Remove the ash trash. The button is underneath it. It doesn't fall down onto the trans tunnel. I ordered a button set off ebay. As buttons fall off, I replace them.

Mine stays between 59f-63f depending on outside temperatures and if humidity gets over 13%

Sent from Embassy network using Tapatalk

[X5chemist]

Originally Posted by EODguy

Mine stays between 59f-63f depending on outside temperatures and if humidity gets over 13%

Ya need some tint! What about winter vent temps? Work on mine blows 40F air. When temps are cool, it can drop to 36-38F. Not sure how accurate the cooking thermostat is at low temps.

[EODguy]

Originally Posted by X5chemist

Ya need some tint! What about winter vent temps? Work on mine blows 40F air. When temps are cool, it can drop to 36-38F. Not sure how accurate the cooking thermostat is at low temps.

I wouldn't mind tint, but I work as an advisor at their military HQ and tint is forbidden. I sometimes get the random deep inspection at the gate and I'm surprised that I don't have to sing a couple of verses of Moon River.....

Sent from Embassy network using Tapatalk