|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#51
09-09-2025, 12:19 PM
|
|||
|
|||
   Just did some powdercoating while waiting on more parts. I'm wondering if I can powdercoat the new waterpump? Is there anything plastic/rubber or just pure metal? 
|
| Sponsored Links | |
|
|
|
|
#52
09-13-2025, 11:30 AM
|
|||
|
|||
|
Just sandblasting and powdercoating some parts while waiting on the last batch of orders to arrive.
Finally got the broken piece of engine block welded and fixed.         
|
|
#53
09-19-2025, 07:39 AM
|
|||
|
|||
  First half of valve stem seals done. Definitely a learning curve...this engine is coming together. Checked the cylinders with a camera, they look clean.
|
|
#54
09-19-2025, 09:19 AM
|
|||
|
|||
|
Looking good.
What does the wear look like on the cam lobes?
|
|
#55
10-02-2025, 02:39 AM
|
|||
|
|||
|
I had a piece of plastic fall into the cylinder and I couldn't turn it over lol. Finally found it and removed it.
I will take some pictures of the cam lobes. The cylinders look like they're in great shape. I was going to do a leak down test, but realized that the intake camshafts have another row of smaller camshafts lol, which is vavletronic? Not sure how I'm supposed to close the valves to do the leak down test? Tomorrow/after tomorrow the plan is to finally pull M54 N62 is still missing a few seals that are stuck in transit (canada post strike...)
|
|
#56
10-02-2025, 07:11 AM
|
||||
|
||||
|
That is essentially a body swap.....you have gumption taking that on without a lift. I pulled my transmission once and the engine/trans/TC + sub-frame twice and thought that was a major job...... This is next level.
__________________
2003 4.4i black ext./black int./black headliner (kid's runabout) 2014 535d X-drive, M package, silver/black interior Sold but not forgotten: 2009 E70 35d, black ext./black int./black headliner (sold 2021) 2006 4.8iS Le Mans blue/cream int./black headliner, SOLD in 2012 sadly... Other hardware: 2015 Cayenne S (wife's new DD and definitely wroooommmmm) 2016 Tundra 1794 edition crew cab, luxo hauler 2005 Tundra crew cab, weekend hauler. Sold after 150k very happy miles.
|
|
#58
10-22-2025, 12:02 PM
|
|||
|
|||
|
Quote:
            Not sure if this looks or not, never worked on engines 🤪
|
|
#59
10-22-2025, 12:08 PM
|
|||
|
|||
|
Finally canada post strike is over and I received the orings, #12 on the diagrams.
 Because the guide rail gets installed at an angle, unless i remove the head, I guess I wasn't careful enough and damaged one of the orings. Gotta order them again lol!... I should've installed the guide straight, over the orings, let it sit for a few hours to compress them, and then i would've probably been able to install at a slight angle. End of October it's getting cold lol. I think I need to start swapping the wiring harness fast. Once it starts snowing it will be too hard to do all that outside...
|
|
| Bookmarks |
|
|
|
|
Linear Mode
