Got the engine almost all put together. I think I only need to install the power steering pump to have all the belts installed.
I'm going to try and bolt it to the transmission and transfer case, and maybe get it installed in the engine compartment.
I don't remember if I mentioned it, I need to redo ABS pump lines that bolt to abs pump. The layout and diameter of connectors is different between pre facelift and facelift vehicles.
This is also a good time to replace hood cables.
I've pretty much finished getting the wiring installed under the hood, so the next step for me is to drop the engine in.
I just want to see if it starts and runs for a minute
It has snowed a lot and the X5 is outside, unfortunately I wasn't able to get things done in time.
But on warmer days, can still work outside. I really don't want it to sit outside all winter...
If I can get the engine started, I can bolt up all the suspension together and tow it inside my garage.
Without the subframe, there's nothing to bolt the suspension to. But once I install the engine, I can put all suspension together and just work on the wiring inside the vehicle
12-01-2025, 07:14 AM
Threaded Mode
