Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > BMW SAV Forums > X5 (E53) Forum
Arnott
User Name
Password
Member List Premier Membership Today's Posts New Posts

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management


 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #9  
Old 07-27-2008, 09:08 AM
Member
 
Join Date: Dec 2007
Location: dfw
Posts: 8
my02x5 is on a distinguished road
Quote:
Originally Posted by jp99
The center plastic component just above those hoses comes off - it holds the pollen filter and, at firewall, fits into two ventilation ports. Once off, you have ready access to the back end of those rotten hoses.

1. Pull the long rubber gasket that seals the area - runs parallel to the firewall the width of the engine compartment.
2. Pull rain catchers (or whatever they are) on each side of the pollen filter area - pull straight up - each is about the size of your hand - they are snap-in, vertically.
3. Locate large nut that holds your battery positive cable in place - locate similar nut on the other side of the engine - that one does not appear to hold anything. Remove nuts, pull the plastic housing straight back off the bolts and lift out. Bolts will stay in place. That center housing, with pollen filter on top, comes out as one large piece - note how it fits back in at the firewall.
4. You should have easy access to the back ends of those hoses. In my case, the back ends had standard BMW hose clamps while the front, top ends had crimped clamps. The crimped ones come off readily with a screw driver to pry at the crimp point or, better, pry the wrapped part of the clamp up and back.
5. Replace hoses, reverse assembly procedure. I bought the two hoses at local dealer and got, also, two clamps to replace the crimped ones.

Ran quieter and smoother, took care of P1159 and P1161 fault codes. The replacement hoses are modified from the original but the parts guy had no idea if they were any better. I doubt it - looks like something that needs to be done every 4 or 5 years.

Good luck - post back if you have a problem. Fun project.
I got the same problem on my '03. Both of my hoses that I can see after removing the engine cover are very soft and "gooey". Actually, one of these two hoses has a large crack and must be replaced. Where is a good place to shop for these hoses. I am having trouble locating them on the internet. Don't really want to buy them from the dealer. What keyword should I use to search for them. thanks in advance.
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On





All times are GMT -4. The time now is 04:13 PM.
vBulletin, Copyright 2026, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.