Replacing windshield washer hoses

[Factory6speed]

I recently went through mine. The headlight washer "distribution piece" was cracked in half and the grommet on the rear pump was leaking. Also some of the headlight washer nozzles were leaking at the little o-ring.

I don't have like a nice assortment of o-rings on hand, but I found an obscure post I think it was on the E46 forum saying that the number 7 o-ring is the perfect fit for these headlight washers. And somehow I had the number 7 o-ring here for some old AN fittings, so I was able to replace all those thanks to some good luck.

61671379530 is the part number for the washer hose. I bought a length of this and was able to get the headlight washers all fixed up. You could probably just get an equivalent hose at the parts store as said.

I think if the rear line was leaking I would just cap and unplug the pump. Is it really worth it..