Hitch install--TORX T20 needed?

[lnnguyen01]

I recently installed the OEM tow hitch. There were no steps where I needed the TORX T20 tool. Did I skip a step somewhere?

The install if not difficult but quite a job. I say it took me 8+ hours. Not difficult but just very tedius.

[UCrewX5]

How did you get the back bumper off without it??

[lnnguyen01]

Originally Posted by UCrewX5

How did you get the back bumper off without it??

That required the T55 driver. Another step required T45 driver. Never needed the T20.

[UCrewX5]

Originally Posted by lnnguyen01

That required the T55 driver. Another step required T45 driver. Never needed the T20.

that's right. Getting my Txx's confused. I don't recall if I needed the T20 or not. As long as everything came apart and went back together properly, you should be all set.

[hayaku]

i didn't need the t20 either... nor did i hammer down the tabs. i used the tabs like they were meant for, to hold the hex bolts on the outside so they don't spin while i tightened the nuts on the inside...

[chubyball]

any pics? Please post some