PDC Problem after 4.6 Body Kit installation...

bsprtsgrp · #1 06-30-2006, 08:25 PM

I finally had the 4.6 Body Kit installed (pics to follow) and now my PDC is not working???

Sponsored Links

benathon · #2 07-01-2006, 03:03 AM

Did you unplug anything? It's weird since you shouldn't had have to remove your bumper or anthing.

benathon · #3 07-01-2006, 03:03 AM

Maybe a fuse?

bsprtsgrp · #4 07-01-2006, 05:22 AM

I get a long audible when I start the X and the light flashing on the PDC button and then nothing. If I drive right up to my garage door, it does not sense it.

alexz · #5 07-01-2006, 09:37 AM

sounds like something is in the way of sensors

bsprtsgrp · #6 07-01-2006, 04:55 PM

I had the dealer body shop paint & install it. Not sure if they removed the bumpers at all to do the installation but it would seem you would not have to.

powers1 · #7 07-02-2006, 08:16 AM

Quote:

Originally Posted by bsprtsgrp

I had the dealer body shop paint & install it. Not sure if they removed the bumpers at all to do the installation but it would seem you would not have to.

It could be they painted the sensors!Remove the paint fromthe sensors and they should work fine.

Tel · #8 07-02-2006, 03:32 PM

I had the same problem and it was a faulty sensor.

Also, when i had my 4.6is fron bumper fitted all the sensors had to be swapped fom my old bumper as they were different.

bsprtsgrp · #9 07-05-2006, 08:11 AM

I took it back to the Dealer Body Shop and for some reason they actually removed the front bumper to install the front diffuser. When they reinstalled it, they pinched one of the PDC sensors wires.

PDC working again.

Sponsored Links