PDC retrofit in 2004+ issue ?

[rlouis]

Anyone put a front/rear pdc kit in an 04+ 4.4i or similiar??
I ordered the kit from my local dealer, part no. 66200142168.

Issue here is with the front side pdc mounts. This kit comes with an entire new molding piece for the two end sensors. The new model front ends don't have this molding piece to replace!! Just wondering if there's a correct kit, or if I have to order some other mounts and drill out the bumper.

You can see the part I'm referring to on page 3 in this install guide:
http://www.bmwmotorsports.org/pdf/X5_pdc_retrofit.pdf

Thanks for your help!

[rlouis]

Alright, 1 more quick question....

I installed the rear PDC and electronics. Went to install the front PDC sensors (was going to modify the mounts to fit), and there's no wire harness hanging there as seen in the above install guide. I looked through all the parts, TKE, WDS, TIS, EBA, etc etc, and the PDC info is not updated for 04+ X5s. I know the wiring goes somewhere to the front of the car as theres a plug for it in the rear at the PDC module.

Anyone know where the heck this plug might be? Didn't see anything right away in the engine compartment. Does the 03 or less have a connection in the front somewhere??

Thanks,
-Ray

[blk133]

I wonder if he ever figured it out... Thinking of doing the same thing and got no idea if my '04 is prewired for it. Called the dealer, gave them last 7 of my VIN and now they are confused too