Front blinker problems...

[yeowzer]

Mine was like that and it ended up being a bad socket and replaced by dealer under warranty.

[Valence]

My car is out of warranty. I would like to obtain the part before I start taking the headlight out (again). Anybody have an idea which part exactly I need? Here's a link to the part diagrams that should contain what I need. I have Xenon, if that matters.
http://www.realoem.com/bmw/partgrp.d...45&hg=63&fg=05

Is it #4 on this diagram? Or #17?:
http://www.realoem.com/bmw/showparts...01&hg=63&fg=05

TIA again

[yeowzer]

Based on what the tech told me, I would say #4. He told me the bulb sockets can go bad. I don't have my service order to confirm what they replaced. Good Luck.

[mrbmwx5]

Originally Posted by Valence

My car is out of warranty. I would like to obtain the part before I start taking the headlight out (again). Anybody have an idea which part exactly I need? Here's a link to the part diagrams that should contain what I need. I have Xenon, if that matters.
http://www.realoem.com/bmw/partgrp.d...45&hg=63&fg=05

Is it #4 on this diagram? Or #17?:
http://www.realoem.com/bmw/showparts...01&hg=63&fg=05

TIA again

this is the one you will need for your car.the #4 in tthe wire diagram # 04BULB SOCKET, TURN INDICATOR WITH CABLE210/200363126904930

[jmj155]

what site ddid you get the information on how to replace the turn signal bulbs. mine just went out

[Zulu95]

Since using hi-temp. CONDUCTIVE grease 5 months ago my front turn signal/marker light problem has not reappeared. Before it was a 2 week between fixes nuisance.