rear wiper arm replacement

X5Flyboy · #1 01-02-2007, 08:30 AM

For those of us with early model X5s, we need to replace the rear wiper arm - For those who have not, the part number is 61-62-7-068-076($36.82/$28.00) which also requires a cover 61-62-7-113-603 ($.065/$.065)

(list/my cost) April 2006

I've posted this in a way earlier thread, but with the renewed interest in wipers, I thought I'd repost it.

Have a Happy, Healthy, Safe New Year

Sponsored Links

vnlecom · #2 01-02-2007, 02:45 PM

Hi,
Is this new wiper the "hook" version? I have a 2001 x5 with the "pin" type wiper arm? Will the new wiper arm fit my year?
Thanks.

Kewl X5 · #3 01-02-2007, 03:02 PM

Yes!! But you can't use your existing rear wiper blade anymore with the new "metal hook" arm. You can get Valeo 18" Ultimate Wiper from TireRack or Bosch ICONs 418A or 418B to fit the rear metal "hook" arm.

To order the Valeo 18" on Tire Rack, you have to "trick" Tire Rack that you have a 2006 X5 (which has the metal rear wiper arm).

Quote:

Originally Posted by vnlecom

Hi,
Is this new wiper the "hook" version? I have a 2001 x5 with the "pin" type wiper arm? Will the new wiper arm fit my year?
Thanks.

X5Flyboy · #4 01-04-2007, 12:48 PM

PS the new wiper arm (which has the 'hook' configuration) was purchased from my dealer who installed it with no labor charge (something I doubt the rest of you will achieve). I believe there is a DIY posted somewhere.

Bearcat_Rob · #5 01-29-2008, 05:33 PM

I've removed the cover and then the bolt but the arm still seems to be attached. Is there anything else I need to do? 2002 model. Or do I just need to use more force?

jbimmer24 · #6 02-14-2008, 12:01 PM

i removed the nut , but the arm those not come off i do'nt want to use too much force and break glass....help

Michelle · #7 02-14-2008, 12:03 PM

Quote:

Originally Posted by jbimmer24

i removed the nut , but the arm those not come off i do'nt want to use too much force and break glass....help

You need to use a little bit of force to remove the arm. Try raising the arm up, and moving back and forth. If needed, use a screwdriver to gently pry up the base.

jbimmer24 · #8 02-14-2008, 12:24 PM

ok we'll try it thanks michelle your so cool, and now i have to go back to BMW cause they did not give me the cap for the metal arm

Sponsored Links