|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
the warning lamp for break pad comes on, I thought I need to replace the pad but when I checked, all pads are still have at least 50% left and the sensors are fine also. what could it be ? any thought ? |
| Sponsored Links | |
|
|
|
|
#2
|
||||
|
||||
|
Was your sensors seated properly? Electrical issues?
|
|
#3
|
|||
|
|||
|
yes, my sensors are seated properly. I checked both of them.
|
|
#4
|
||||
|
||||
|
Faulty sensor?
__________________
Mike F Current: 2017 Grand Cherokee HEMI 2017 Kawasaki ZX-14r 2017 Harley RG Ultra 2017 Harley Fatboy S |
|
#5
|
||||
|
||||
|
It could have been pulled a little and is disconnected. Either at the plug or the wires are coming out of the back are broken, seen that b4 You can also make a little jumper wire to test if the sensor is bad. Know what your doing if you try that.
Sometimes the systems just freaks out. The old unplug the battery for 15 mins trick might reset it. No first hand experience with that on a brake sensor however. |
|
#6
|
||||
|
||||
|
I have the same issue. I have plenty of meat and the sensors are not making contact with metal. It comes on occationally, sometimes it flickers on then off. I thought maybe the brake fluid is low or something. Is the only connection for the sensors the one in the wheelwells? I haven't checked for a loose connection yet, but is that the only spot?
__________________
Loweringlinks.net Formerly known as "Silver 5"
|
|
#7
|
||||
|
||||
|
Yes the connection in the front is in that little box on the left and as I recall the rear is on the control arm (right side).
|
|
#8
|
||||
|
||||
|
Thanks "The Cleaner" your technical knowledge is unbelievable. You seem to know alot about everything on these SAV's. Did you work for BMW?
__________________
Loweringlinks.net Formerly known as "Silver 5"
|
|
#9
|
||||
|
||||
|
I have been in BMW parts for 18 years (Shhhhh I want to keep that low key), and under the hoods of BMW's since about 1992 (shade tree stuff in my garage). I also was very into NASA club events and spend many years building and maintaining my cars. Being the only one with a decent tool set and garage space to work on cars I have had countless projects move in and out of my garage.
That’s The Cleaners short story. I’ll post a couple picts of my old track car since you got me thinking about it. Now I miss it. ![]() ![]()
|
|
#10
|
|||
|
|||
|
Cleaner _Thanks, you're the greatest.....
Silver 5, did you fix it ? I will check mine this weekend. The front is in the driver side and the rear is in the passenger side. I'll give an update.... Happy new Year...... |
![]() |
| Bookmarks |
|
|
|
|