|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
?? on adjusting headlight beam
|
| Sponsored Links | |
|
|
|
|
#2
|
||||
|
||||
|
Quote:
|
|
#3
|
|||
|
|||
|
There are 2 areas above the headlight under the hood where you can use a screwdriver to adjust the beams. These screwdriver holes are in contact with 2 circular wheels, as you turn, they spin adjusting the headlight beam. Put your X close to a wall and turn your headlights on, then adjust, then back up 10 ft or so and make sure they're still even on the wall. Everyone probably has a different way of doing this, but this is mine. Also, I believe the passenger side headlights are slightly higher to make road signs more visible, or it could be the opposite, driver side is lower because of oncoming traffic. I keep mine pretty even (level). Hope that helps.
|
![]() |
| Bookmarks |
|
|
|
|