|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Homelink stall in UK spec X5
Hi All I have been tackling installing a Homelink Garage door opener, and there is definately not a "little White connector" up there at all, had a good root around and can see nothing. I know there are some people that have "tapped" into the existing lighting circuit to power up their homelink and was wondering if any of you could let me know which wires were used to which pins?
cheers Andrew |
|
#2
|
||||
|
||||
|
Could you give a little more information? Are you installing a garage door opener or asking how to configure Homelink?
__________________
An unwavering defender of those I see worth protecting. "promote the general welfare, not provide the general welfare" We the People of the United States, in Order to form a more perfect Union, establish Justice, insure domestic Tranquility, provide for the common defence, promote the general Welfare, and secure the Blessings of Liberty to ourselves and our Posterity, do ordain and establish this Constitution for the United States of America. |
|
#3
|
|||
|
|||
|
I am trying to physically install the homelink garage door opener. In Europe the car is not pre-wired as in the US so there is no connector and I need to tap into existing wire loom to get the device powered up. Looking to see if anyone else in Europe has done this and if so what wires did they use.
Andrew |
|
#4
|
||||
|
||||
|
hi, i have a 2006 3.0d lemans sport. i have installed homelink. The cable was taped to a wire loom above the drivers head, had to remove light fitting to access it.
|
|
#5
|
|||
|
|||
|
Mine is a 2003 3.0 Sport and I have searched the entire area and couldnt find it. I even removed the lights above the visors and still cannot find it.
Andrew |
![]() |
| Bookmarks |
|
|
|
|